Move your mouse over image or click to enlarge
Smart Home Gear Model #86-102 In-Wall Light Switch in White Finish
by Nuvo Lighting
Save 43%
$82.50
$46.95
Features:
- Works with incandescent lamps, fluorescent(CFL), and LED lighting
- Fits standard wall plate (not included)
- Z-Wave Plus Certified
- Clean design with white LED status indicator
- GROUP/ALL enabled, if supported by controller
- Multiple scene control using double and triple tap
- Provides instant manual status change to controller
- Supports Central Scene command class
- Over-The-Air firmware upgrade available, if supported by controller
- Supports Network Wide Inclusion (inclusionthrough a repeater), if supported by controller
- Powered by Sigma Design 500 Series module inside
- Functions as a Z-Wave signal repeater
- Supports screw and wire terminals
General
- Operating Temperature 32° F to 104° F
- Storage Temperature -4° F to 140° F
- Storage Humidity 80%
- Electrical Ratings
- Input Voltage 120 VAC RMS
- Input Frequency 60Hz
- Wire Terminals Requires neutral
- Maximum Output Load 900W incandescent, 200W CFL/LED,
- ½ horsepower motor and 15A,
- 1800W resistive load
- Fuse 0.5A
- Z-Wave Frequency for USA and Canada 908.4Mhz at 40kps, 916Mhz
- at 100kps
- Wireless Range (controller & repeater) 130 ft. at open air, 1 meter high, LOS
- Modulation FSK/GFSK
- Tx Power from IC setting 2 dbm
- Rx Sensitivity at 40 kps -99 dbm
- Rx Sensitivity at 100 kps -91.8 dbm
- Standby Current 25mA
Yoke: 4.13"x2.13"x.076"
Minimum Hole for Wire Accepts #12 AWG (0.081" dia)
Doesn't Accept #8 AWG (0.1285"dia)
Wire Type Copper or plated aluminum
Clamp Parts Copper only
Wire Binding Screws UL 486a/b: Minimum Dia=#6(.138)
Max Threads/inch = 36
Color Munsell N9 Apple White
Material PC, Type 6485
https://qualitydiscountlighting.com/pages/returns-and-replacements
