Smart Home Gear Model #86-103 In-Wall Dimmer in White Finish
by Nuvo Lighting
Save 43%
$103.95
$58.95
Features:
- Works with incandescent and most dimmable fluorescent (CFL), or LED lighting
- 7 LEDs to indicate ON/OFF/Dimming level status Fits standard wall plate (not included)
- Z-Wave Plus Certified
- GROUP/ALL enabled, if supported by controller Multiple scene control using double and triple tap
- Provides instant manual status change to controller
- Supports Central Scene command class Over-The-Air firmware upgrade available, if supported by controller
- Supports Network Wide Inclusion (inclusion through a repeater), if supported by controller Poweredby Sigma Design 500 Series moduleinside
- Functions as a Z-Wave signal repeater Supports screw and wire terminals
General
- Operating Temperature 32° F to 104° F
- Storage Temperature -4° F to 140° F
- Storage Humidity 80%
- Input Voltage 120 VAC RMS
- Input Frequency 60Hz
- Maximum Output Load Incandescent (600W, single gang),
Dimmable CFL/LED (150W) - Wire Terminals Requires neutral
- Fuse 10A
- Z-Wave Frequency for USA and Canada 908.4Mhz at 40kps, 916Mhz
at 100kps - Wireless Range (controller & repeater) 130 ft. at open air, 1 meter high, LOS
- Modulation FSK/GFSK
- Tx Power from IC setting 2 dbm
- Rx Sensitivity at 40 kps -99 dbm
- Rx Sensitivity at 100 kps -91.8 dbm
- Standby Current 25mA
- Body:2.8"x1.71"x1.41"
- Yoke: 4.13"x2.13"x.076"
- Line, Load, Ground, Traveler, Neutral
Accepts #12 AWG (0.081" dia) Doesn't Accept #8 AWG (0.1285"dia)
Copper or plated aluminum Copper only
UL 486a/b: Minimum Dia=#6(.138) Max Threads/inch = 36
Munsell N9 Apple White PC, Type 6485
https://qualitydiscountlighting.com/pages/returns-and-replacements